BWPCW - B4-32B PART A
- MSDS: BWPCW
- Manufacturer: AC PRODUCTS INC
- Product Name: B4-32B PART A
- National Stock Number: 8010-00N057287
Product Identification
Product ID:B4-32B PART A
MSDS Date:09/18/1986
FSC:8010
NIIN:00N057287
MSDS Number: BWPCW
Responsible Party
PLACENTIA, CA 92670
US
Emergency Phone: 714-630-7311
Info Phone: 714-630-7311
Cage: IO980
Contractor
Telephone: 714-630-7311
Cage: IO980
Ingredients
2-BUTANONE; (METHYL ETHYL KETONE) (MEK) (SARA 313)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 44%
OSHA PEL 200 PPM
ACGIH TLV: 200 PPM;300 STEL
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
100%.
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 40%
OSHA PEL 1000 PPM
ACGIH TLV: 750 PPM;1000 STEL
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TOLUENE (SARA 313) (CERCLA)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 6%
OSHA PEL 200 PPM
ACGIH TLV: 50 PPM, S
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
POLYURETHANE (NON HAZARDOUS)
CAS: 68400-67-9
Fraction By Weight: <10%
OSHA PEL N/K
ACGIH TLV: N/K
YELLOW PIGMENT; (YELLOW DYE) (NON HAZARDOUS)
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:BREATHING DIFFICULTIES, DIZZINESS OR
LIGHT-HEADEDNESS, NAUSEA, RESPIRATORY IRRITATION, FATIGUE,
HEADACHE, POSSIBLE UNCONSCIOUSNESS & ASPHYXIATION. NOTE:TOLUENE
APPEARS ON THE NAVY LISTING OF OCCUPATIO NAL CHEMICAL REPRODUCTIVE
HAZARDS. SEEKCONSULTATION FROM APPROPRIATE HEALTH PROFESSIONALS
CONCERNING (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:LATEST HAZARD LIST INFORMATION & SAFE
HANDLING & EXPOSURE INFORMATION .
Medical Cond Aggravated by Exposure:NOT AVAILABLE.
First Aid
First Aid:INHAL:REMOVE INDIVIDUAL TO FRESH AIR. IF BREATHING IS
DIFFICULT GIVE OXYGEN. IF BREATHING HAS STOPPED ADMINISTER ARTF
RESP. KEEP PERSON WARM, QUIET & CALL MD IMMEDIATELY. EYES:FLUSH
W/WATER FOR AT LEA ST 15 MINUTES, GET MEDICAL ATTENTION. SKIN:WASH
EXPOSED AREA W/LOTS OF SOAP & WATER, REMOVE CONTAMINATED CLOTHING.
INGEST:INDUCE VOMITING, CALL MD IMMEDIATELY.
Fire Fighting
Flash Point Method:TOC
Flash Point:4F,-16C
Extinguishing Media:USE FOAM, CO*2 OR DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . WATER MAY BE UNSUITABLE AS AN EXTINGUISHING MEDIA.
Unusual Fire/Explosion Hazard:KEEP WORK AREAS FREE OF HOT METAL SURFS &
OTHER SOURCES OF IGNIT. VAPS ARE HVR/AIR, WILL TRAVEL ALONG GROUND
& ACCUM IN LOW LYING AREAS. METAL CNTNRS (SUPDAT)
Accidental Release
Spill Release Procedures:SMALL SPILLS - MOP OR WIPE UP IMMEDIATELY.
REMOVE TO OUT OF DOORS. LARGE SPILLS - EVACUATE AREA. ELIMINATE
SOURCES OF IGNITION, TRANSFER TO CLOSED METAL CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP PRODUCT CONTAINERS COOL, DRY &
AWAY FROM SOURCES OF IGNITION. STORE & USE W/ADEQUATE VENTILATION.
Other Precautions:EMPTIED CONTAINERS MAY RETAIN PRODUCT RESIDUES
(VAPOR, LIQUID &/OR SOLID), ALL HAZARD PRECAUTIONS MUST BE
OBSERVED. AVOID CONTACT W/SKIN &/OR BREATHING VAPORS.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED AIR PURIFYING OR AIR
SUPPLYING RESPIRATORS ACCORDINGLY.
Ventilation:CONTROL AIRBORNE CONCENTRATIONS BELOW EXPOSURE GUIDELINE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:SELECTION OF ITEMS (GLOVES, BOOTS, APRON)
WILL DEPEND UPON CONCENTRATION.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ:SHOULD BE GROUNDED &/OR BONDED WHEN MATERIAL IS TRANSFERRED.
Chemical Properties
Boiling Pt:B.P. Text:133F,56C
Vapor Density:HVR/AIR
Spec Gravity:0.85 (H*2O=1)
Solubility in Water:SEE INGREDIENTS.
Appearance and Odor:YELLOW LIQUID W/KETONE ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS OR BASES, ALKALI METALS &
HALOGENS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CO &
CO*2.
Disposal
Waste Disposal Methods:CONSULT FEDERAL, STATE & LOCAL REGULATIONS. SEND
FOR A LICENSED RECLAIMER OR PERMITTED INCINERATOR. DO NOT DUMP INTO
SEWERS, ON GROUND OR INTO ANY BODY OF WATER.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.